12v Thermistor relay module

12v Thermistor relay module

Price: $1.5Sku: FA2086-13
Product Introduction

12v Thermistor relay module

USES:

Temperature detection, through the potentiometer adjustment to a valve point, control the corresponding temperature, relay output, directly connected to ac high-power products.

Module features:

1. Automatic control temperature: start below or above the temperature. Choose to start above the set temperature when the output terminal is normally open and start below the set temperature when the output terminal is normally closed;

2, comparator output direct drive relay, can be connected to 220V AC or other equipment;

3. The potentiometer regulates the temperature;

4. The sensor interface can be equipped with a row of pins and a thermal sensor with lead;

5. External dimension: 50x26mm, 19mm thick, with 4 3mm fixing bolt holes for easy installation.

Electrical parameters:

Supply voltage: 12VDC

Current: greater than 150mA

Load: 250V 10A AC or 30V 10A DC

Module instructions:

1. The thermistor module is the most sensitive to the ambient temperature. It is generally used to detect the ambient temperature.

2. When the ambient temperature of the module exceeds the set threshold, the relay pulls in and the common end is connected with the normal start. When the ambient temperature is lower than the set threshold, the relay is disconnected and the common end is connected with the normally closed end.

3. The three ports of the common end, normally open and normally closed are equivalent to a double-control switch. When the relay coil has electricity, the common end conducts with the normal beginning; when there is no electricity, the common end conducts with the normally closed end.

Leave a Reply

Your email address will not be published.