XH-W1209DC 12V heat cool temp thermostat temperature 50cm(blue)

XH-W1209DC 12V heat cool temp thermostat temperature 50cm(blue)

Price: $1.19Sku: FA2019-1
Product Introduction

XH-W1209DC 12V heat cool temp thermostat temperature 50cm(blue)

Technical parameters

  • Control range: -50 ~ 110
  • Input Power: DC 12V
  • Resolution: -9.9-99.9 0.1 , other temperature ranges 1
  • Measuring inputs: NTC (10K 0.5%) Waterproof sensor 0.5M
  • Measurement accuracy: 0.1
  • Output range: 1 way 10A relay
  • Control accuracy: 0.1
  • Environmental requirements: -10-60 , humidity 20% -85%
  • Hysteresis accuracy: 0.1
  • Size: 48 * 40mm
  • Refresh rate: 0.5S
  • Power consumption: Static current: <= 35MA,attract current:<= 65MA
  • Temperature protection :0-110
  • Display Type: 0.28 ” three digital display tube

How to use:

  • Connect the power supply and the load, you can supply to the controller,Is displayed as a measured temperature,Press the SET button, the display flashes the temperature,Press + – to set the desired temperature,After setting press SET to confirm return,The controller automatically performs the relay by setting off!
  • Lights, LED status descriptions:Indicator: Off The relay is switched off, Always indicate the relay is closed.LED: Shows LL is the sensor open, showing HH is out of range, the thermostat will be forced to close the relay, the display — as high temperature protection.
  • Parameter Function:Long press SET 5 seconds to enter the main menu settings, press the + – toggle P0 … P8 long press SET or 10 seconds of no key activity confirmed their return to the controller

Code Code Description Setting range Factory setting
P0 Cooling /Heating C/H C
P1 Hysteresis setting 0.5-15 2
P2 Highest setting upper limit 110 110
P3 Lowest setting upper limit -50 -50
P4 Temperature correction -7-7 0
P5 Delay start time 0-10 Minutes 0
P6 High temperature alarm 0-110 OFF
Off state, long press + – boot to restore the factory settings

Leave a Reply

Your email address will not be published.