5110 Screen(Nokia 5110 ) 84×48 LCD Shield Module Blue Backlight

5110 Screen(Nokia 5110 ) 84×48 LCD Shield Module Blue Backlight

Price: $1.82Sku: FA2122
Product Introduction

5110 Screen(Nokia 5110 ) 84×48 LCD Shield Module Blue Backlight

Specification:
Use serial interface communicate with the master processor,the number of interface signal line reduced greatly, only 8 signal lines including power and GND.Support different types of MCU,such as the SPI,MCS51 serial mode 0 of AVR.Transfer rate up to 4Mbps,can full speed write display data without waiting time.
Can use the conductive glue to connect the module with the printed board,without connecting cable.The metal hooks on the module can fix the module on the printed board,which is very easy to install and replace.
LCD controller/driver chip has been bound to LCD chip,the volume of LCD is small
Low power supply,the working current in normal situation is lower than 200μA,and has power-down mode

Description:
– 4-board LED, backlight, light uniformity
– PCB Size: 45 (mm) x 45 (mm)
– The corners were positioning holes, along with two rows of the upper and lower connection port
– Material: Metal
Wiring:
– VCC – power input ( 3.3v )
– GND – Ground
– SCE – Chip Select
– RST – Reset
– D \ C – data / instruction selection
– DN – Serial Data Line
– CLK – Serial Clock Line
– LED – backlit console
Drivers will be provided:
– Nokia 5110 FOR 51 (keil c)
– Nokia 5110 FOR PIC (picc)
– Nokia 5110 FOR AVR (gcc)
– Nokia 5110 FOR STM32 (keil for arm)
– Nokia 5110 FOR MSP430
– Nokia 5110 FOR LPC2148

Leave a Reply

Your email address will not be published.