The NANO IO Shield V1.0 DIY (Welded) is a screw terminal expansion board designed to make wiring connections to the Arduino Nano secure, stable, and tool-free. Instead of relying on jumper wires that can loosen over time, this shield routes every available Nano pin to a labeled screw terminal block, allowing you to connect stripped wires directly with a simple turn of a screwdriver.
The “Welded” designation indicates that this version ships fully assembled, with all headers, screw terminals, and connectors already soldered in place. This makes it a ready-to-use solution for developers who want the reliability of screw terminal connections without spending time on assembly. Simply plug your Nano into the headers and begin wiring.
This shield is particularly valuable for projects that need to be reliable over the long term — permanent installations, industrial prototypes, field deployments, and any application where vibration or movement could dislodge a loose jumper wire. The screw terminals accept a range of wire gauges, making it easy to connect sensors, actuators, power supplies, and other peripherals with solid, dependable connections.
The board exposes all of the Nano’s digital, analog, and power pins in a clearly organized layout. Each terminal is labeled with its corresponding pin name, so you can identify connections at a glance without consulting a pinout diagram. This makes the shield a practical choice for both experienced developers who want faster assembly and beginners who are still learning the Nano’s pin layout.
The compact form factor preserves the Nano’s small footprint while adding the convenience of screw terminals, and the board can be mounted in an enclosure or on a panel for finished projects.
Whether you are building a control panel, a data logger, a motor driver interface, or a custom piece of equipment, the NANO IO Shield V1.0 DIY (Welded) provides a clean, professional way to make secure connections to your Arduino Nano.
Features
-
Screw terminal connections — Every Nano pin is routed to a labeled screw terminal block for secure, tool-tightened wiring.
-
Fully assembled (Welded) — All headers and terminals pre-soldered, ready to use out of the box.
-
Full pin breakout — All digital, analog, and power pins are exposed and clearly labeled.
-
Vibration-resistant connections — Screw terminals hold wires firmly, ideal for installations subject to movement or vibration.
-
Tool-free sensor swapping — Loosen a screw, swap a wire, and tighten again — no soldering or jumper wires required.
-
Clear pin labeling — Silkscreen labels match the Nano’s pin names for quick identification.
-
Compact Nano footprint — Preserves the small size of the Nano while adding practical connectivity.
-
Panel and enclosure friendly — Suitable for mounting in control panels, enclosures, and finished equipment.
Technical Specifications
| # | Parameter | Specification |
|---|---|---|
| 1 | Compatibility | Arduino Nano and compatible boards |
| 2 | Terminal Type | Screw terminal blocks |
| 3 | Digital I/O Pins | 14 pins broken out (including 6 PWM) |
| 4 | Analog Input Pins | 8 pins broken out |
| 5 | Power Pins | 5V, 3.3V, VIN, and GND terminals |
| 6 | Wire Gauge | Accepts standard hook-up wire gauges |
| 7 | Board Format | Nano-compatible form factor |
| 8 | Assembly | Fully assembled (Welded), ready to use |
