UNO R3 development board with Type-C Chinese Version CH340G + ATmega328P (without cable)

$1.99

SKU: FA1003-2 Category: Tag:

Description

The UNO R3 development board with a Type-C port, CH340G USB-to-serial converter, and ATmega328P microcontroller is a cost-effective, fully functional clone of the original Arduino Uno R3, with the primary difference being the USB interface and chip. It does not include a USB cable in the package

Key Features and Specifications
This board is designed to be fully compatible with the Arduino IDE and most R3 shields and accessories. 
  • Microcontroller: ATmega328P (often in an SMD/flat package).
  • USB Interface Chip: CH340G, which handles the USB-to-serial communication with your computer. This chip is used instead of the more expensive ATmega16U2 found on official Arduino boards to reduce cost.
  • USB Connector: Features a modern Type-C port for connection to a computer.
  • Operating Voltage: 5V.
  • Input Voltage (recommended): 7-12V via the DC barrel jack.
  • Digital I/O Pins: 14 (6 of which provide PWM output).
  • Analog Input Pins: 6.
  • Clock Speed: 16 MHz.
  • Memory: 32 KB Flash memory (0.5 KB used by bootloader), 2 KB SRAM, 1 KB EEPROM.
  • Additional Features:
    • Often includes extra rows of pin headers (male and female) to facilitate easier connections with Dupont wires and shields.
    • Onboard LEDs for power, TX (transmit), and RX (receive) indicators. 
What is Not Included
As specified, the package does not include a USB cable. You will need a USB-A to USB-C cable to connect the board to your computer for programming and power.

Additional information

Microcontroller

ATmega328P (often in an SMD/flat package)

USB Interface Chip

CH340G, which handles the USB-to-serial communication with your computer. This chip is used instead of the more expensive ATmega16U2 found on official Arduino boards to reduce cost

USB Connector

Features a modern Type-C port for connection to a computer

Operating Voltage

5V

Digital I/O Pins

14 (6 of which provide PWM output)

Analog Input Pins

6

Clock Speed

16 MHz

Memory

32 KB Flash memory (0.5 KB used by bootloader), 2 KB SRAM, 1 KB EEPROM

Additional Features

Often includes extra rows of pin headers (male and female) to facilitate easier connections with Dupont wires and shields.
Onboard LEDs for power, TX (transmit), and RX (receive) indicators.

Reviews

There are no reviews yet.

Be the first to review “UNO R3 development board with Type-C Chinese Version CH340G + ATmega328P (without cable)”