1.3″ Inch Blue(Or White) I2C IIC OLED LCD Module 4pin (with VCC GND SCL SDA)

$1.69

SKU: FA2128 Category:

Description

Product Overview

The 1.3-inch I2C OLED Display Module is a compact, high-contrast monochrome screen designed for embedded projects requiring crisp visual output without consuming excessive power or I/O pins. Powered by the SH1106 driver IC and featuring a sharp 128×64 pixel resolution, this display delivers vibrant text, detailed graphics, and custom icons in either striking blue or clean white .

Unlike traditional LCDs that require a power-hungry backlight, OLED (Organic Light Emitting Diode) technology allows each pixel to emit its own light. This self-emissive design provides true blacks (inactive pixels are completely off), an exceptional 10,000:1 contrast ratio, and >160° viewing angles – ensuring the display remains readable from almost any angle .

The module uses the 4-pin I2C interface (VCC, GND, SCL, SDA), requiring only two data lines to connect to your microcontroller. This preserves valuable I/O pins for other sensors and peripherals . With support for both 3.3V and 5V logic, it is directly compatible with Arduino, ESP32, ESP8266, Raspberry Pi, STM32, and most other development boards – no level shifters required .

Key Features

  • 1.3-Inch Active Area: Larger than 0.96″ OLEDs, offering 34.5mm × 19mm display area for better readability

  • 128×64 Pixel Resolution: High-definition display with 128 columns and 64 rows – capable of showing detailed graphics, bitmaps, and up to 8 lines of small text

  • SH1106 Driver IC: Industry-standard controller with built-in 132×64-bit SRAM buffer (supports 128×64 active area)

  • I2C Interface: 2-wire communication requires only 2 data lines (SCL and SDA) – saves valuable I/O pins

  • Wide Voltage Compatibility: Operates on 3.3V–5V DC, compatible with both 5V (Arduino) and 3.3V (ESP32/ESP8266) logic

  • Ultra-Low Power Consumption: Uses approximately 0.04W (typical operation) – no backlight means lower battery drain

  • Wide Viewing Angle: >160° visibility ensures clear readouts from almost any angle without contrast shift

  • Wide Operating Temperature: Rated for -40°C to +85°C, suitable for industrial and outdoor applications

  • Self-Emitting OLED Technology: True blacks with 10,000:1 contrast ratio – superior readability in all lighting conditions

Technical Specifications

Parameter Operating Value
Display Type OLED (Organic Light Emitting Diode)
Resolution 128 × 64 pixels
Display Colors Blue or White (monochrome)
Driver IC SH1106
Communication Protocol I2C (IIC)
Default I2C Address 0x3C
Operating Voltage 3.3V – 5V DC
Typical Consumption 0.04W (normal operation) / 0.08W (full screen)
Display Area (W × H) 29.42mm × 14.7mm
Module Dimensions (W × H) Approx. 35.5mm × 33.5mm
Operating Temperature -40°C to +85°C
Contrast Ratio 10,000:1
Viewing Angle >160°
Driver Duty 1/64 Duty

Additional information

Display Type

OLED (Organic Light Emitting Diode)

Resolution

128 × 64 pixels

Display Colors

Blue or White (monochrome)

Driver IC

SH1106

Communication Protocol

I2C (IIC)

Default I2C Address

0x3C

Operating Voltage

3.3V – 5V DC

Typical Consumption

0.04W (normal operation) / 0.08W (full screen)

Display Area (W × H)

29.42mm × 14.7mm

Module Dimensions (W × H)

Approx. 35.5mm × 33.5mm

Operating Temperature

-40°C to +85°C

Contrast Ratio

10,000:1

Viewing Angle

>160°

Driver Duty

1/64 Duty

Reviews

There are no reviews yet.

Be the first to review “1.3″ Inch Blue(Or White) I2C IIC OLED LCD Module 4pin (with VCC GND SCL SDA)”