Pure sine wave inverter driver board EGS002 “EG8010+IR2110”

Description

Description

The EGS002 is a high-performance, intelligent SPWM (Sinusoidal Pulse Width Modulation) driver board specifically designed for single-phase pure sine wave inverters. It combines the EG8010 pure sine wave ASIC (Application Specific Integrated Circuit) with the robust IR2110S high and low-side MOSFET driver ICs, providing a complete, ready-to-use solution for building professional-grade DC-AC power inverters .

Unlike modified square wave inverters that can cause humming in motors and are unsuitable for sensitive electronics, the EGS002 generates a true pure sine wave output with low harmonic distortion. This makes it safe to power laptops, computers, smartphones, medical devices, and inductive loads like fans and pumps .

The EG8010 chip integrates all the critical functions required for a modern inverter: a precise SPWM generator, dead-time control circuit, soft-start mechanism, and comprehensive protection features including over-voltage, under-voltage, over-current, and over-temperature protection . An external 12MHz crystal oscillator ensures high frequency accuracy and waveform stability.

The board features two IR2110S driver ICs configured to drive two separate MOSFET half-bridges, along with cross-conduction prevention logic for enhanced anti-interference capability . A voltage comparator (LM393) provides over-current protection feedback.

Housed on a compact 62mm × 33mm PCB, the EGS002 provides jumper-selectable configuration for output frequency (50/60Hz), dead time (300ns, 500ns, 1.0μs, 1.5μs), and soft-start enable/disable, eliminating the need for programming or external microcontrollers . An optional 128×32 serial LCD interface allows real-time monitoring of output voltage, frequency, temperature, and current .

Whether you are building a solar power system, a UPS backup, a wind power inverter, or a motor speed controller, the EGS002 driver board provides the intelligence and reliability required for both hobbyist and professional applications.

Key Features

• Pure Sine Wave Output – Generates true sine wave AC with low harmonic distortion, safe for sensitive electronics and inductive loads 

• Integrated EG8010 ASIC – CMOS technology IC integrates SPWM generator, dead-time control, soft start, protection circuits, RS232 serial communication, and LCD driver module 

• IR2110S MOSFET Drivers – Two high-performance high/low-side driver ICs for driving two MOSFET half-bridges; supports bootstrap operation for high-side switching 

• Dual Modulation Modes – Supports both unipolar and bipolar SPWM modulation (default unipolar) 

• Adjustable Output Frequency – Jumper selectable: 50Hz fixed, 60Hz fixed, 0-100Hz adjustable, or 0-400Hz adjustable 

• Configurable Dead Time – Four dead time options via jumpers: 300ns, 500ns, 1.0μs, or 1.5μs 

• Soft Start Function – Jumper-enableable 3-second soft start to reduce inrush current during startup 

• Comprehensive Protection – Over-voltage protection (OVP), under-voltage protection (UVP), over-current protection (OCP), and over-temperature protection (OTP) 

• LED Fault Indication – 3mm red LED indicates fault conditions with distinct blink patterns for each protection type 

• External 12MHz Crystal Oscillator – Provides high precision timing and low harmonic distortion 

• Real-Time Feedback – Monitors voltage, current, and temperature for closed-loop control 

• Serial Communication & LCD Support – RS232 interface for parameter configuration (voltage, frequency, etc.) and 128×32 serial LCD display support for real-time monitoring 

• No Programming Required – All parameters are set via hardware jumpers; no firmware coding needed 

• Compact Size – 62mm × 33mm PCB, suitable for integration into various inverter designs

Technical Specifications