Sale!

SnappyXO Advanced Robotics Kit

SKU: FA6066 Tag:
Weight 2.04 kg
Dimensions 30.48 × 22.86 × 15.24 cm

Description

This kit comes with the the most SnappyXO hardware parts, an Arduino Uno, many sensors, such as ultrasonic sensor, line-tracking, DC and servo motors, a Bluetooth module, and many more. In addition, our mechanism synthesis app MotionGen Pro allows you to synthesize your robot motions virtually first and then you can prototype them using this kit.

 

Additional Information:

Weight 4.5 lb(2.04kg)
Dimensions 12 × 9 × 6 in (Two Boxes)

 

Contents – Hardware Parts

  1. 3X channel plates – 3
  2. 4X channel plate – 1
  3. 2X beams – 8
  4. 3X beams – 8
  5. 4X beams – 6
  6. 5X beams – 6
  7. 6X beams – 6
  8. 7X beams – 4
  9. 8X beams – 4
  10. Outer wheels – 4
  11. Inner wheels – 2
  12. Gears – 2
  13. Pinions – 2
  14. Motor gear – 2
  15. Launcher – 1
  16. Gear adapter – 2
  17. L clips – 20
  18. H clips – 20
  19. Wheel H clips – 4
  20. C Clips – 20
  21. Sliding C clips – 4
  22. 60 degree clips – 6
  23. 45 degree clips – 6
  24. Fixed pivots 1F, 2F,3F – 8, 4, 6 respectively
  25. Moving pivots 1M, 2M – 8, 4 respectively
  26. DC motor mount – 2
  27. Mini servo mount – 4
  28. Arduino Mount – 1
  29. 9V battery mount – 2
  30. 6V battery mount – 2
  31. 3V battery mount – 2
  32. Limit switch mount – 2
  33. Ultrasonic sensor mount – 1
  34. Line sensor mount – 2
  35. HM10 bluetooth mount – 2
  36. Encoder mount – 4
  37. Encoder wheels – 2
  38. DC motor flanges – 4
  39. Rod flanges – 2
  40. Mini servo horn (plus) – 2
  41. Mini servo horn (single) – 4
  42. Mini servo horn (double) – 4
  43. 400 pt. breadboard mount – 2
  44. 170 pt. breadboard mount – 1
  45. Rocker-boat switch mount – 1
  46. Wire holder clips – 2
  47. Caster set – 1
  48. Spacers – 20
  49. Delrin rods (1 inch) – 10
  50. Delrin rods (2.5 inch) – 4
  51. Delrin rods (5 inch) – 2
  52. Rubber O rings – 2
  53. Ping-pong ball – 1
  54. Steel ball – 1
  55. Rubber bands – 2

Contents – Mechatronics Parts

  1. Arduino compatible Uno board – 1
  2. DC Gearhead motors – 2
  3. Continuous Rotation Servos – 2
  4. Finite Rotation Servos – 2
  5. Remote Control Module – 1
  6. Ultrasonic Sensor – 1
  7. Limit Switches – 2
  8. 400 pt. breadboard – 1
  9. 25 pt. breadboard – 1
  10. L293D H-bridge IC – 2
  11. Photocell – 2
  12. Buzzer – 1
  13. Momentary Switch – 2
  14. Breadboard Slide Switch – 1
  15. 10k Potentiometer – 1
  16. 9V Battery Snap (Plug type) – 1
  17. 9V Battery Snap (I-type) – 1
  18. AA battery holder (6V) – 1
  19. 140 Pcs. Wire kit – 1
  20. M-M, M-F, F-F wires – 20 each
  21. Resistors 330Ω, 1kΩ, 10kΩ – 5 each
  22. Red, Blue, Green LED – 5 each
  23. Multicolor LED – 1
  24. 9V Sattery – 1
  25. AA Batteries – 4
  26. DC Motor Wheels – 2
  27. Speed Encoder Sensor – 2
  28. HM10 Bluetooth Module – 1
  29. Line Tracking Sensor – 1

SnappyXO Advanced Robotics kit based on Arduino for middle-, high-school, college students, makers and hobbyists. Perfect for learning mechanical design, practical electronics, and programming either on your own or in the classroom.

Learn how to incorporate sensors and motors in your robots and control them with your phone or tablet using our ArduinoBlue app! This is our most comprehensive kit, which allows you to build a variety of robots including walking robots, robot arms, wheeled robots, etc.

Related products