The board is based on Arduino Nano and uses an ATmega168 microcontroller. It provides expandability and ease of use by adding terminal blocks for all the IO and power pins while being small and breadboard-friendly. It offers the same connectivity and specs as the UNO board, but in a smaller form factor.
The board is programmed using the Arduino Software (IDE), the Integrated Development Environment common to all our boards and running both Arduino online and offline. For more information on how to get started with the Arduino Software visit the Getting Started page.
This board can be powered by means of the Mini-B USB or 7-12VDC through the unregulated external power supply pin labelled Vin (RAW) and GND.
This board delivers 5VDC to your target device that you might want to interface, using the pins labelled 5V and GND. (You can power your sensor off this).
Specifications:
- 12 digital input/output ports D2-D13.
- 8 analog input ports AO-A7.
- 1 pair of TTL level serial port transceiver ports RX/TX.
- 6 PWM ports, D3, D5, D6, D9, D10, D11.
- Using Atmel Atmega168P-AU microcontroller.
- Support USB download and power supply.
- Support external 3.3V-12V DC power supply.
- Support lithium battery and 9V battery power supply.
- Support ISP download.
