ELECTRONIC MODULES
Showing 385–400 of 428 results
-

XL6009 Adjustable DC-DC Boost Converter Module (4.5-35V) – High-Power Step-Up Voltage Regulator with Digital Voltmeter, Superior to LM2577 Upgraded Version
SKU:FA2102-0-0 -

XL6009 15W (25W with Heatsink) Adjustable Step-Up DC-DC Converter Module – 4A Input, 5-50V Output (2.5A Max) with Enable Pin | High-Efficiency, Low-Ripple | Superior to LM2577
SKU:FA2102-0-1 -

XL6019 5A Adjustable Boost Converter Module – High Power Upgrade to XL6009 & LM2577 (3-40V Input, 5A Output)
SKU:FA2102-0-2 -

XL4015 5A DC-DC Adjustable Buck Module 4~38V High Power Low Ripple 96%
SKU:FA2102-1 -

XL4015 5A DC-DC Adjustable Buck Module 5~35V(without heat sink) High Power Low Ripple
SKU:FA2102-1-0 -

XL4005 5A DC-DC Adjustable Step-Down Power Supply Module High Power High Efficiency Voltage Regulator Far More Than LM2596
SKU:FA2102-1-1 -

600W 10A High-Power DC-DC Boost Converter Module – Constant Current Voltage Step-Up Power Supply for LED Drivers, Solar, Mobile Applications (Non-Isolated)
SKU:FA2102-10 -

XL4015 5A Li-ion battery charging/LED drive/buck constant current power module
SKU:FA2102-2 -

5A XL4015 constant voltage constant current step-down power module, voltage and current display, LED drive lithium battery charging
SKU:FA2102-3 -

Adjustable DC-DC USB Boost Converter Module – Step-Up 5V to 3.3V/9V/12V/24V Voltage Regulator for DIY Electronics & Desktop Power Supply
SKU:FA2102-4 -

15W 2A Adjustable USB Power Supply Module – DP3DT Switch, Regulated Output (NC)
SKU:FA2102-4-1 -

XY-3606 24V/12V to 5V 5A DC-DC Buck Converter Module – High-Efficiency Step-Down Power Supply with LM2596S Chip
SKU:FA2102-5 -

LM2596/LM2576 DC-DC Buck Converter Module – 12V/24V to 5V Step-Down Power Supply, 3A Max Output, Voltage Regulator Board
SKU:FA2102-5-0 -

6.5-40V to 5V DC-DC Step-Down Power Converter Module with USB Charging Port & LED Voltage Display for Car/Truck/Vehicle
SKU:FA2102-6 -

250W 10A DC-DC Boost Converter Module – High-Power Step-Up Voltage Regulator, Constant Current LED Driver, Mobile Power Supply, Non-Isolated Booster CircuitProduct Overview The 250W 10A DC-DC Boost Converter Module is a high-power, high-efficiency step-up switching regulator designed to convert lower DC voltages into higher, adjustable output voltages. Whether you need to power a laptop from a 12V car battery, drive high-power LED arrays, or create a custom benchtop power supply, this module delivers the performance and flexibility required for demanding applications . At its core, this module utilizes a non-isolated boost (BOOST) topology with a maximum output power of 250W and a peak output current of 10A . The input voltage range of 8.5V to 48V allows it to accept power from a wide variety of sources, including 12V car batteries, 24V truck electrical systems, solar panels, and 36V industrial power rails. The output is continuously adjustable from 10V to 50V, making it suitable for everything from charging lithium battery packs to powering 36V LED lighting systems . A standout feature of this module is its dual-mode operation: it functions as both a constant voltage (CV) power supply and a constant current (CC) LED driver. The onboard potentiometers allow you to independently set the output voltage and current limit, making it perfect for charging batteries (where a constant current/constant voltage profile is required) and driving high-power LEDs (where a regulated current is essential to prevent thermal runaway) . The module achieves a conversion efficiency of up to 96% thanks to its 150kHz switching frequency and high-quality components, including a toroidal inductor and low-ESR capacitors . For enhanced durability, the module is built on an aluminum PCB substrate, which acts as a heatsink to dissipate heat during high-power operation. When running at currents above 6-8A, external cooling (a fan or larger heatsink) is recommended to maintain optimal performance and longevity . Key Features High Power Output: Capable of delivering up to 250W of output power with a peak output current of 10A (derate based on input/output voltage differential) . Wide Input & Output Range: Accepts DC input from 8.5V to 48V and provides an adjustable output from 10V to 50V (with some variants supporting up to 80V) . Constant Voltage (CV) + Constant Current (CC) Mode: Functions as both a standard voltage regulator and a constant current LED driver. Ideal for charging batteries (CV/CC profile) and driving high-power LEDs . High Conversion Efficiency: Achieves up to 96% efficiency, minimizing power loss and heat generation. Operating frequency: 150kHz . Adjustable Output via Potentiometers: Two multi-turn potentiometers allow for precise, independent adjustment of output voltage (RV1) and constant current limit (RV2) . Built-in Protection Features: Includes overcurrent protection (OCP) and input reverse polarity protection to safeguard the module and your connected devices . Robust Construction: Built on an aluminum PCB substrate for enhanced heat dissipation. Includes 4 mounting holes (3mm) for secure installation . Compact Form Factor: Small footprint (approx. 70mm × 36mm × 13mm) and lightweight (approx. 65g) allows for easy integration into portable projects . Technical Specifications Parameter Operating Value Module Type Non-isolated Boost (BOOST) Converter Input Voltage DC 8.5V – 48V Output Voltage DC 10V – 50V (continuously adjustable) Output Current (Max) 10A (Peak) / 8A (Continuous with heatsink) Constant Current Range 0.2A – 8A (Adjustable) Maximum Output Power 250W (Derate based on input/output differential) Conversion Efficiency Up to 96% Switching Frequency 150kHz Quiescent Current 10mA (12V to 20V conversion) Input Reverse Polarity Protection Yes Overcurrent Protection Yes (approx. 13A trigger) Operating Temperature -40°C to +85°C Module Dimensions (L×W×H) Approx. 70mm × 36mm × 13mm Weight Approx. 65g
SKU:FA2102-8 -

500W 10A DC-DC Boost Converter Module – High-Power Step-Up Voltage Regulator, Constant Current LED Driver, Mobile Power Supply, Non-Isolated Boost Circuit
SKU:FA2102-9